TiAl Sport 44mm External Wastegate MV-R

TiAl Sport 44mm External Wastegate MV-R
Brand: TiAL
Product Code: MVR
Availability: In Stock
Price: $392.00

Available Options

* Available Colors:

   - OR -   

Since 1994 TiAL Has been offering some of the highest-quality turbo system components on the market. Boost Controlled Performance suggests using TiAL products on any turbocharged setup. This kit includes various springs to adjust boost pressure, V-Band Clamps, and vacuum fittings. Made in Michigan with Michigan pride. The MV-R 44mm wastegate is more compact than any current 44 or 46mm wastegate on the market. You get two top air ports and three bottom air ports for easy install. This unit is a direct bolt on for our V44. The MV-R has an optional extreme high temp casting available for Motorsport applications

  • Part #: MVR Warranty: Manufacture limited lifetime
  • Flange : V- Band
  • Water Cooled: Yes (Optional not required)
  • Pipe Size : Inlet Flange: 1.875" OD Outlet Flange: 1.75" OD
  • Spring Pressures : .2bar to 1.5bar Included
  • Thread Air Ports (5): M10 x 1.0,
  • Water Ports (2): M8 x 1.0
  • Colors : Black, Blue, Red, Purple, Silver

High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. High temperature silicone Nomex reinforced actuator diaphragm. 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. All Stainless Steel hardware. Mating weld flanges are 304L Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black). 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. Ultra compact design fits in very tight spaces V-Band inlet and outlet make install easy, flanges and clamps are in the box! Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized. Extreme high temp casting available for Motorsport applications WATER COOLED ACTUATOR TOP Patent pending water cooling Two -4AN water ports Coolant passes through actuator bottom and has very little affect on cooling system as a whole WHATS IN THE BOX altIncluded with every Tial MV-R: MV-R Assembly 2 TiAL -4 removable water fittings MV-S Valve Seat Inlet V-band clamp & Flange Outlet V-Band Clamp & Flange 2 TiAL Air Fittings Plugs for unused air ports Extra actuator springs

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: